2,6-DICHLOROBENZENE-1-SULFONYL CHLORIDE

2,6-DICHLOROBENZENE-1-SULFONYL CHLORIDE - Names and Identifiers

Name	2,6-Dichlorobenzenesulphonyl chloride
Synonyms	BUTTPARK 3711-63 2,6-Dichlorobenzenesulfonyl chloride 2,6-DICHLOROBENZENESULFONYL CHLORIDE 2,6-DICHLORO PHENYLSULFONYL CHLORIDE 2,6-DICHLOROBENZENESULPHONYL CHLORIDE 2,6-Dichlorobenzenesulphonyl chloride BENZENESULFONYL CHLORIDE, 2,6-DICHLORO- 2,6-DICHLOROBENZENE-1-SULFONYL CHLORIDE 2,6-Dichlorobenzene-1-sulfonyl chloride
CAS	6579-54-0
EINECS	627-349-7
InChI	InChI=1/C6H3Cl3O2S/c7-4-2-1-3-5(8)6(4)12(9,10)11/h1-3H

2,6-DICHLOROBENZENE-1-SULFONYL CHLORIDE - Physico-chemical Properties

Molecular Formula	C6H3Cl3O2S
Molar Mass	245.51
Density	1.636±0.06 g/cm3(Predicted)
Melting Point	53-56 °C (lit.)
Boling Point	326.0±32.0 °C(Predicted)
Flash Point	>230°F
Water Solubility	Reacts with water.
Vapor Presure	0.000423mmHg at 25°C
Appearance	Solid
BRN	1531023
Storage Condition	under inert gas (nitrogen or Argon) at 2-8°C
Sensitive	Moisture Sensitive
Refractive Index	1.581
MDL	MFCD00052311

2,6-DICHLOROBENZENE-1-SULFONYL CHLORIDE - Risk and Safety

Hazard Symbols	C - Corrosive
Risk Codes	34 - Causes burns
Safety Description	S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
UN IDs	UN 1759 8/PG 2
WGK Germany	3
HS Code	29049090
Hazard Note	Corrosive/Moisture Sensitive
Hazard Class	8
Packing Group	II

2,6-DICHLOROBENZENE-1-SULFONYL CHLORIDE - Introduction

2. chloride is an organic compound whose chemical formula is C6H3Cl2SO2Cl. The following is an introduction to its nature, use, preparation and safety information:

Nature:
-Appearance: 2. chloride is a colorless to pale yellow liquid.
-Solubility: It can be dissolved in common organic solvents, and only slightly soluble in water.

Use:
-Chemical reaction: 2. chloride is a commonly used aromatic sulfonyl chloride reagent, which can be used to synthesize other organic compounds, such as drugs, dyes and antibiotics.
-Antibacterial agent: It can also be used as an industrial preservative and fungicide.

Preparation Method:
2, chloride can be obtained by reacting 2,6-dichlorophenyl ether with liquid chlorine. In the reaction, liquid chlorine and catalyst are added to react at an appropriate temperature to generate 2, chloride.

Safety Information:
- 2, chloride is an irritating and corrosive substance, contact with the skin, eyes or respiratory system may cause irritation and injury. Personal protective equipment such as protective gloves, glasses and protective masks should be worn during use.
-Avoid inhaling its vapor during operation, and ensure that the operating area is well ventilated.
-The compound should be stored in a closed container, away from fire and oxidizing agents, and avoid mixing with other chemicals.

It is important to note that when handling and using chloride, it is important to observe the relevant safety procedures and comply with local regulations and safety guidelines.

Last Update：2024-04-09 19:05:51